Phone User Interface
Reference
Configuring Settings from the Unit (Page 17)
Configuration File Reference
USER_DNS1_ADDR (Page 170)
DNS2
Description
Specifies the IP address of the secondary DNS server.
Note
•
This setting is available only when
[Connection Mode]
is set
to
[Static]
.
Value Range
Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value
Not stored.
Phone User Interface
Reference
Configuring Settings from the Unit (Page 17)
Configuration File Reference
USER_DNS2_ADDR (Page 170)
4.3.2 Ethernet Port Settings
This screen allows you to change the connection mode of the Ethernet ports and the VLAN settings.
Note
•
When you change the settings on this screen and click
[Save]
, after the message "Complete" has been
displayed, the unit will restart automatically with the new settings applied. If a unit is on a call when
"Complete" has been displayed, the unit will restart after the unit returns to idle.
•
Incorrect settings may cause a network failure. In such a case, you cannot access the Web user
interface anymore. To access it again, you need to correct the speed/duplex settings or perform IP
Reset through phone user interface programming. For details, refer to the Operating Instructions on
the Panasonic Web site (
®
see
Introduction
).
74
Administrator Guide
Document Version 2011-06
4.3.2 Ethernet Port Settings
Summary of Contents for KX-UT133-B
