Panasonic KX-UT133-B Administrator'S Manual Download Page 69

Page: 69 / 264

DNS2

Description

Indicates the specified IP address of the secondary DNS server
(reference only).

Note

•

If the secondary DNS server address is not specified, this field
will be left blank.

Value Range

IP address of the secondary DNS server

Default Value

Not applicable.

4.2.3 VoIP Status

This screen allows you to view the current VoIP status of each line’s unit.
Clicking

[Refresh]

updates the information displayed on the screen.

4.2.3.1 VoIP Status

Line No.

Description

Indicates the line number (1–2 or 1–4) to which a phone number is
assigned (reference only).

Note

•

The available line number varies depending on the type of the
unit being used.

Value Range

•

Line 1–Line 2 (for KX-UT113/KX-UT123)

•

Line 1–Line 4 (for KX-UT133/KX-UT136)

Default Value

Not applicable.

Document Version 2011-06

Administrator Guide

4.2.3 VoIP Status

Summary of Contents for KX-UT133-B









































































































































































































































































Search results

Summary of Contents for KX-UT133-B

Reviews:

Related manuals for KX-UT133-B

Brands by name

Popular brands

Panasonic KX-UT133-B, Administrator'S Manual

Search results

Summary of Contents for KX-UT133-B

Reviews:

Related manuals for KX-UT133-B

Brands by name

Popular brands