Panasonic KX-UDS124 Administrator'S Manual Download

Page: 96 / 292

Value Range

Max. 40 characters

Note

•

You cannot leave this field empty.

•

If "{mac}" is included in this field, it will be replaced with the
SIP-CS’s MAC address in lower-case.

•

If "{MAC}" is included in this field, it will be replaced with the
SIP-CS’s MAC address in upper-case.

•

If "{MODEL}" is included in this field, it will be replaced with the
SIP-CS’s model name.

•

If "{fwver}" is included in this field, it will be replaced with the
firmware version of the SIP-CS.

Default Value

Panasonic_{MODEL}/{fwver} ({mac})

2.5.1.2 SIP Server

Registrar Server Address

Description

Specifies the IP address or FQDN of the SIP registrar server.

Value Range

Max. 127 characters

Default Value

Not stored.

Registrar Server Port

Description

Specifies the port number to use for communication with the SIP
registrar server.

Value Range

1–65535

Default Value

5060

Proxy Server Address

Description

Specifies the IP address or FQDN of the SIP proxy server.

Value Range

Max. 127 characters

Default Value

Not stored.

Proxy Server Port

Description

Specifies the port number to use for communication with the SIP proxy
server.

Value Range

1–65535

Default Value

5060

Administrator Guide

Document Version 2013-03

2.5.1 SIP Settings

Summary of Contents for KX-UDS124





































































































































































































































































































Search results

Summary of Contents for KX-UDS124

Reviews:

Related manuals for KX-UDS124

Brands by name

Popular brands

Panasonic KX-UDS124, Administrator'S Manual

Search results

Summary of Contents for KX-UDS124

Reviews:

Related manuals for KX-UDS124

Brands by name

Popular brands