Default Value
101
2.5.4.2 Quality of Service (QoS)
RTP Packet QoS (DSCP)
Description
Specifies the DSCP level of DiffServ applied to RTP packets.
Value Range
0–63
Default Value
0
2.5.4.3 Statistical Information
RTCP Enable
Description
Selects whether to enable or disable RTCP (Real-Time Transport
Control Protocol). For details, refer to RFC 3550.
Value Range
•
Yes
•
No
Default Value
No
RTCP Interval
Description
Specifies the interval, in seconds, between RTCP packets.
Value Range
5–65535
Default Value
5
2.5.4.4 Jitter Buffer
Maximum Delay
Description
Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.
Value Range
3–50 (
´
10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than
[Initial Delay]
–
This value must be greater than
[Minimum Delay]
–
[Initial Delay]
must be greater than or equal to
[Minimum
Delay]
Default Value
20 (
´
10 ms)
Document Version 2013-03
Administrator Guide
107
2.5.4 VoIP Settings
Summary of Contents for KX-UDS124
