Panasonic KX-UDS124 Administrator'S Manual Download Page 59

Page: 59 / 292

Model

Description

Indicates the model number of the S-PS that is registered to the SIP-CS
(reference only).

Value Range

•

KX-UDT111

•

KX-UDT121

•

KX-UDT131

Default Value

Not applicable.

Firmware Version

Description

Indicates the firmware version of the S-PS that is registered to the
SIP-CS (reference only).

Value Range

Firmware version ("nn.nn.nnn" [n=0–9])

Default Value

Not applicable.

Phonebook Import Time [Result]

Description

Indicates the time that phonebook data is imported to S-PSs when
importing phonebook data to all S-PSs (

see

2.6.10 Import

Phonebook - All

The information in brackets ([ ]) indicates the import result (reference
only).

Value Range

"nn/nn/nnnn nn:nn [xxxxxxxxxxxxxxxxxxxx]"

Note

•

When the SIP-CS’s time is not set, "-" will be displayed.

Default Value

Not applicable.

2.2.6 PS VoIP Status

This screen allows you to view the information of the SIP-CS to which each S-PS is connected, and the phone
number and VoIP status of each S-PS.

Document Version 2013-03

Administrator Guide

2.2.6 PS VoIP Status

Summary of Contents for KX-UDS124





































































































































































































































































































Search results

Summary of Contents for KX-UDS124

Reviews:

Related manuals for KX-UDS124

Brands by name

Popular brands

Panasonic KX-UDS124, Administrator'S Manual

Search results

Summary of Contents for KX-UDS124

Reviews:

Related manuals for KX-UDS124

Brands by name

Popular brands