Panasonic KX-UDS124 Administrator'S Manual Download Page 68

Page: 68 / 292

Value Range

Max. 40 characters

Note

•

You cannot leave this field empty.

•

If "{mac}" is included in this field, it will be replaced with the
SIP-CS’s MAC address in lower-case.

•

If "{MAC}" is included in this field, it will be replaced with the
SIP-CS’s MAC address in upper-case.

•

If "{MODEL}" is included in this field, it will be replaced with the
SIP-CS’s model name.

•

If "{fwver}" is included in this field, it will be replaced with the
firmware version of the SIP-CS.

Default Value

Panasonic_{MODEL}/{fwver} ({mac})

2.3.2.2 Proxy Server Settings

Enable Proxy

Description

Selects whether to use the proxy server.

Value Range

•

Yes

•

Default Value

Proxy Server Address

Description

Specifies the IP address or FQDN of the proxy server.

Value Range

Max. 127 characters

Note

•

You cannot leave this field empty if

[Enable Proxy]

is set to

[Yes]

Default Value

Not stored.

Proxy Server Port

Description

Specifies the port number of the proxy server.

Value Range

1–65535

Default Value

8080

2.3.3 HTTP Authentication

This screen allows you to change the ID and the password used to authenticate the User account.

Administrator Guide

Document Version 2013-03

2.3.3 HTTP Authentication

Summary of Contents for KX-UDS124





































































































































































































































































































Search results

Summary of Contents for KX-UDS124

Reviews:

Related manuals for KX-UDS124

Brands by name

Popular brands

Panasonic KX-UDS124, Administrator'S Manual

Search results

Summary of Contents for KX-UDS124

Reviews:

Related manuals for KX-UDS124

Brands by name

Popular brands