Panasonic KX-UDS124 Administrator'S Manual Download

Page: 123 / 292

No Answer (Phone Number)

Description

Specifies the phone number of the destination to forward calls to when
a call is not answered after it has rung a specified number of times.

Note

•

If you change this setting when

[Synchronize Do Not Disturb

and Call Forward]

is set to

[Yes]

, the change to this setting is

not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.

Value Range

Max. 32 characters

Note

•

You cannot leave this field empty if

[No Answer (Enable Call

Forward)]

is set to

[Yes]

Default Value

Not stored.

No Answer (Ring Count)

Description

Specifies the number of times that an incoming call rings until the call
is forwarded.

Note

•

If you change this setting when

[Synchronize Do Not Disturb

and Call Forward]

is set to

[Yes]

, the change to this setting is

not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.

Value Range

0, 2–20 (0: No ring)

Default Value

2.6.5 Button Settings

This screen allows you to view the name and phone number of each S-PS.
Click a numbered tab to view this screen for a particular S-PS.

Document Version 2013-03

Administrator Guide

123

2.6.5 Button Settings

Summary of Contents for KX-UDS124





































































































































































































































































































Search results

Summary of Contents for KX-UDS124

Reviews:

Related manuals for KX-UDS124

Brands by name

Popular brands

Panasonic KX-UDS124, Administrator'S Manual

Search results

Summary of Contents for KX-UDS124

Reviews:

Related manuals for KX-UDS124

Brands by name

Popular brands