Panasonic KX-UDS124 Administrator'S Manual Download Page 264

Page: 264 / 292

To copy the source settings to the desired S-PS
1.

In the Web user interface, click the

[Telephone]

tab, and then click

[Button Settings]

The

[Button Settings]

screen appears.

Click a numbered tab to find the S-PS whose settings you want to copy, and then click

[Copy & Paste]

for

that S-PS.
The

[Button Settings - Copy & Paste]

screen appears.

Select the S-PSs to have settings copied to in

[Available PS]

, and then click

To select all available S-PSs, click

. To deselect S-PS(s), click

Click

[Copy & Paste]

The flexible button settings will be applied to the other S-PS(s).

264

Administrator Guide

Document Version 2013-03

6.4 Copying Flexible Button Settings to Other S-PSs

Summary of Contents for KX-UDS124





































































































































































































































































































Search results

Summary of Contents for KX-UDS124

Reviews:

Related manuals for KX-UDS124

Brands by name

Popular brands

Panasonic KX-UDS124, Administrator'S Manual

Search results

Summary of Contents for KX-UDS124

Reviews:

Related manuals for KX-UDS124

Brands by name

Popular brands