Panasonic KX-TD500, Installation Manual

Page: 262 / 316

Utility
262 Installation Manual
#1318 Digital trunk out of sync T1 or PRI23 card (physical number XXX) lost the
synchronization with the clock time sent from the Central
Office.
#1319 Digital trunk RAI signal
reception T1 or PRI23 card (physical number XXX) received RAI
(Remote Alarm Indication) signal sent from the Central
Office.
#1320 Digital trunk AIS signal
reception T1 or PRI23 card (physical number XXX) received AIS
(Alarm Indication Signal) signal sent from the Central
Office.
#1323 Digital trunk frame failure On booting-up of T1 or PRI23 card (physical number
XXX), it failed to synchronize with the clock time sent
from the Central Office.
#1324 Digital trunk multi frame
error The PBX detected the multiframe synchronization error
of T1 or PRI23 card.
#1325 Digital trunk error rate over The PBX exceeded the number of multiframe errors per
second which the PBX required to recognize the remote
alarm.
#1328 DSP-1 link failure DSP (Digital Signal Processor) link failure of T1 card
occurred.
#1332 Digital trunk restoration The status of T1 or PRI23 card is changed from "Fault" to
"INS (In-Service).
#1333 Card status fault Card fault occurred.
#1500 Port link failure The PBX synchronized with the port of VPS (DPT)/
Doorphone (TXXXXX: Physical port no.) in vain.
#1501 Free Block error The internal memory was depleted. (Memory #1)
#1502 Free Block error The internal memory was depleted. (Memory #2)
#1503 Free Block error The internal memory was depleted. (Memory #3)
#1504 Free Block error The internal memory was depleted. (Memory #4)
#1505 Free Block error The internal memory was depleted. (Memory #5)
#1506 Free Block error The internal memory was depleted. (Memory #6)
#1507 Free Block error The internal memory was depleted. (Memory #7)
#1508 Free Block error The internal memory was depleted. (Internal error #1)
#1509 Free Block error The internal memory was depleted. (Internal error #2)
Error Log (Minor)
Error Code Error Message Cause