Panasonic KX-TD500, Installation Manual

Page: 240 / 316

Utility
240 Installation Manual
4.3 Traffic Information
4.3.1 Traffic Information
You can display the traffic information on your Maintenance Console PC by downloading the
traffic data measured at KX-TD500 System.
Traffic Menu consists of the following seven submenus.
• 4.3.2 Station
• 4.3.3 Trunk Group
• 4.3.4 Operator
• 4.3.5 UCD (Uniform Call Distribution)
• 4.3.6 OGM
• 4.3.7 AGC
• 4.3.8 Incoming Group
If you select "Traffic Information" in the "Utility" drop-down menu, "Traffic Measurement"
screen is displayed. The current status of traffic measurement is displayed on the top of this
screen. There are "Start," "Stop" and "View" buttons, which control measurement, depending
on under the condition of traffic measurement. The details of each item are as follows.
Traffic Measurement Status
Start Traffic Measurement
Interrupt Traffic Measurement
View Traffic Data
• Now Idling The system is not in the measurement mode at present.
• Now measuring The system is in the measurement mode now.
• "Start" button The traffic measurement begins.
This button is available only when the Traffic
Measurement is idle.
• "Stop" button The traffic measurement stops.
This button is available only when the system is
measuring the traffic.
• "View" button "Traffic Information" screen is displayed.