
2.1
Manager Programming
General Programming
53
Example) In case that the ISDN extension number is assigned "3";
30 through 39 are effective as MSN's. The extension user can call any terminal equipment
on the ISDN S0 bus with MSN individually. Pressing "30" calls all extensions on the ISDN
S0 bus simultaneously.
•
In case of the KX-TD1232, port numbers 03 through 06 are for the Master System and 09
through 12 are for the Slave, if available.
•
An extension number is invalid if the leading first or second digits disagree with the setting
of the programme [100]
Flexible Numbering, 1st through 16th hundred extension blocks.
If one digit is assigned as the leading digit, some extensions have two digits and some have
three digits. If two digits are assigned, some have three digits and some have four digits.
•
Double entry or incompatible entry is invalid including the assignment of programmes
[003]
TD286 Extension Number Set, [127]
Extension Number Assignment, [130]
Phantom Extension Number Assignment and
Floating Number Assignment. Valid entry examples: 10 and 11; 10 and 110. Invalid
entry examples: 10 and 106; 210 and 21.
•
programme [013]
ISDN Extension Name Set is used to give names to the extension
numbers.
Feature References
Integrated Services Digital Network (ISDN) Extension
Summary of Contents for KX-TD1232NE
