manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 155 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 155

2.5

CO Line Programming

General Programming 

155

2.5

CO Line Programming 

[400]

CO Line Connection Assignment

Description

Used to identify the CO lines which are connected to the system. This prevents users from 
originating a call to a line which is not connected.

Selection

•

CO line number:
KX-TD816 – 01 through 08, 
KX-TD1232 – 01 through 54, 
( =all CO lines)

•

Connect / No Connect

Default

All CO lines – Connect

Programming

1.

Enter 400.

Display: CO Connection

2.

Press NEXT.

Display: CO Line No?

3.

Enter a CO line number.

To enter CO line number 01, you can also press NEXT.

Display example: CO01:Connect

4.

Keep pressing SELECT until the desired selection is displayed.

5.

Press STORE.

6.

To programme another CO line, press NEXT or PREV, or SELECT and the desired CO 
line number.

7.

Repeat steps 4 through 6.

8.

Press END.

Conditions

•

In case of the KX-TD1232, CO01 through CO12 are for the Master System and CO13 
through CO24 are for the Slave, if available.

•

To assign all CO lines to one selection, press the   key at step 3. In this case, the display 
shows the contents programmed for CO01.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments