Panasonic KX-TD1232NE, Programming Manual, Page: 71 / 352

2.2 System Programming
General Programming 71
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another selection, press NEXT or PREV, or SELECT and the desired
selection number.
7.
Repeat steps 4 through 6.
8.
Press END.
To remove all the feature numbers except selection numbers (01) through (16) 1st
through 16th extension blocks;
1.
Enter 100.
2.
Press NEXT.
3.
Enter 00.
Display: All Feature CLR?
4.
Press STORE.
5.
Press END.
Conditions
• Each extension block has one or two digits, consisting of 0 through 9. Assign the leading
digits for extension numbers of the respective blocks.
• Assignment of extension blocks defines the limits for programs [003] Extension Number
Set, [012] ISDN Extension Number Set, [017] TD286 Extension Number Set,
[127] Voice Mail Extension Number Assignment, [130] Phantom Extension Number
Assignment and [813] Floating Number Assignment.
• To clear an extension block (01) through (16), it is required to change the corresponding
numbers assigned in programs [003]
Extension Number Set, [012] ISDN Extension
Number Set, [017] TD286 Extension Number Set, [127] Voice Mail Extension Number
Assignment, [130] Phantom Extension Number Assignment and [813] Floating
Number Assignment.
• Each feature number has one through three digits, consisting of 0 through 9, , and #.
• If or # is included in a feature number, dial pulse telephone users cannot access the
feature.
• Double entry and incompatible combinations are invalid. Valid entry example: 30 and 31,
210 and 211. Invalid entry example: 5 and 5, 30 and 301.
• If you delete a feature number, the feature cannot be used by dialling operation.
• You can remove all the feature numbers except selections (01) through (16).
Feature References
Flexible Numbering