manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 248 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 248

2.7

Extension Programming

248

General Programming 

[614]

Department Codes of ISDN Port

Description

Assigns the department code of the ISDN port.

Selection

•

Port number:
KX-TD816 – 01 through 04, 
KX-TD1232 – 03 through 06, 09 through 12, 
( =all ports)

•

Department code:
5 digits (max.)

Default

All ports — Not Stored

Programming

1.

Enter 614.

Display: ISDN Dept. Code

2.

Press NEXT.

Display: Port NO?

3.

Enter a port number.

To enter a first port number, you can also press NEXT.

Display example: #03: Not Stored

4.

Enter a department code.

To delete the current entry, press CLEAR.

To change the current entry, press CLEAR and the new code.

5.

Press STORE.

6.

To programme another port, press NEXT or PREV, or SELECT and the desired port 
number.

7.

Repeat steps 4 through 6.

8.

Press END.

Conditions

•

Each port has one department code. Each code has a maximum of 5 digits, consisting of 0 
through 9.

•

In case of KX-TD1232, port numbers 03 through 06 are for the Master System and 09 
through 12 are for the Slave, if available.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments