Panasonic KX-TD1232NE Programming Manual Download Page 238

Page: 238 / 352

2.7

Extension Programming

238

General Programming

[609]

Voice Mail Access Codes

Description

Assigns a mailbox number for each extension, only if programme [990]

System Additional

Information, Area 02 – bit 8 is set to "free".

Selection

•

Jack number:
KX-TD816 – 01 through 16, (-1 / -2)
KX-TD1232 – 01 through 64, (-1 / -2)
(-1 = first part, -2 = second part)

•

Mailbox number:
16 digits (max.)

Default

All jacks – Not Stored

Programming

Enter 609.

Display: Mailbox ID Code

Press NEXT.

Display: Jack NO ?

Enter a jack number.

To enter jack number 01, you can also press NEXT.

To select the second part (-2), press NEXT after entering a jack number.

Display example: #01-1:Not Stored

Enter the mailbox number.

To delete the current entry, press CLEAR.

To change the current entry, press CLEAR and the new number.

Press STORE.

To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.

Repeat steps 4 through 6.

Press END.

Conditions

•

In case of the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33
through 64 are for the Slave, if available. Jack numbers in the out-of-service system are
unacceptable.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Search results

Summary of Contents for KX-TD1232NE

Reviews:

Panasonic KX-TD1232NE, Programming Manual, Page: 238 / 352

Search results

Summary of Contents for KX-TD1232NE

Reviews: