manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 226 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 226

2.7

Extension Programming

226

General Programming 

2.7

Extension Programming

[600]

EXtra Device Port

Description

EXtra Device Port (XDP) allows a single line telephone (SLT) to be connected to the same jack 
as a proprietary telephone (PT) or Console. This programme assigns which jacks are XDP. The 
SLT and the PT / Console of the programmed jack work as independent extensions.

Selection

•

Jack number:
KX-TD816 – 01 through 16, 
KX-TD1232 – 01 through 64, 
( =all jacks)

•

Enable / Disable

Default

All jacks – Disable

Programming

1.

Enter 600.

Display: XDP Assign

2.

Press NEXT.

Display: Jack NO ?

3.

Enter a jack number.

To enter jack number 01, you can also press NEXT.

Display example: #01: Disable

4.

Keep pressing SELECT until the desired selection is displayed.

5.

Press STORE.

6.

To programme another port, press NEXT or PREV, or SELECT and the desired jack 
number.

7.

Repeat steps 4 through 6.

8.

Press END.

Conditions

•

In case of the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 
through 64 are for the Slave, if available.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments