Panasonic KX-TD1232NE Programming Manual Download Page 189

Page: 189 / 352

2.5

CO Line Programming

General Programming

189

[440]

TD286 ISDN Port Type

Description

Assigns the type of each port either CO line or extension line on a TD286 ISDN port basis.

Selection

•

Port number:
KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)

•

CO (CO line) / Extension

Default

All ports – Extension

Programming

Enter 440.

Display: TD286 Line Type

Press NEXT.

Display: Port No?

Enter a port number.

To enter a first port number, you can also press NEXT.

Display example: #01:Extension

Keep pressing SELECT until the desired selection is displayed.

Press STORE.

To programme another port, press NEXT or PREV, or SELECT and the desired port
number.

Repeat steps 4 through 6.

Press END.

Conditions

•

For the KX-TD816, port numbers 05 and 06 are fixed as "Extension."

•

For the KX-TD1232, port number 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.

•

To assign all ports to the same selection, press the key in step 3. In this case, the display
shows the contents programmed for the first port.

•

After this assignment, you should reset the system so that this assignment is effective.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Search results

Summary of Contents for KX-TD1232NE

Reviews:

Panasonic KX-TD1232NE, Programming Manual, Page: 189 / 352

Search results

Summary of Contents for KX-TD1232NE

Reviews: