manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 45 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 45

2.1

Manager Programming

General Programming 

45

[008]

Absent Messages

Description

Used to programme the absent messages. An absent message, if set by the extension user, is 
displayed on the calling extension's telephone to show the reason for the user's absence.

Selection

•

Message number: 1 through 9

•

Message: 16 characters (max.)

Default

1: Will Return Soon

2: Gone Home

3: At Ext %%%

4: Back at %%:%%

5: Out Until %%/%%

6: In a Meeting

7 through 9: Blank (not stored)

Programming

1.

Enter 008.

Display: Message Asn.

2.

Press NEXT.

Display: MSG No?->

3.

Enter a message number.

To enter message number 1, you can also press NEXT.

Display example: MSG 1:Will Return

4.

Enter the message.

For entering characters, see Section 1.4

Entering Characters.

To delete the current entry, press CLEAR.

To change the current entry, press CLEAR and the new message.

5.

Press STORE.

6.

To programme another message, press NEXT or PREV, or SELECT and the desired 
message number.

7.

Repeat steps 4 through 6.

8.

Press END.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments