Panasonic KX-TD1232NE Programming Manual Download Page 276

Page: 276 / 352

2.8

Resource Programming

276

General Programming

[804]

External Pager BGM

Description

Used to determine whether external pagers will receive Background Music (BGM). BGM -
External is turned on and off by an operator.

Selection

•

External pager number:
KX-TD816 – 1 / 2
KX-TD1232 – 1 through 4

•

Disable (sends no BGM) / Enable (sends BGM)

Default

All external pagers – Disable

Programming

Enter 804.

Display: Ext-Pag BGM

Press NEXT.

Display: Pager NO?

Enter an external pager number.

To enter pager number 1, you can also press NEXT.

Display example: LS1:Disable

Keep pressing SELECT until the desired selection is displayed.

Press STORE.

To programme another pager, press NEXT or PREV, or SELECT and the desired external
pager number.

Repeat steps 4 through 6.

Press END.

Conditions

•

In case of the KX-TD1232, external pagers 1 and 2 are installed in the Master System, 3
and 4 in the Slave, if available.

•

Programme [803]

Music Source Use is used to select the music source to be used for

BGM.

Feature References

Background Music (BGM) - External

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Search results

Summary of Contents for KX-TD1232NE

Reviews:

Panasonic KX-TD1232NE, Programming Manual, Page: 276 / 352

Search results

Summary of Contents for KX-TD1232NE

Reviews: