User Programming (Manager Programming)
3-5
3.1
User Programming Instructions
Programming Ways
Advancing to the next stage
When “
USR-PGM NO?
→
” is displayed, you can select one of the following:
• To go to program [000], press the NEXT button.
• To go to another program, enter the 3-digit program address.
Rotation of jack number
Each jack of our Digital Super Hybrid System supports the connection of a digital
proprietary telephone and an analogue device with different extension numbers (eXtra
Device Port: XDP function).
To program this function it is necessary to assign two parts for each jack. The first part
of jack one is 01-1. The second part of jack one is 01-2. The first part of jack two is
02-1 and so on. The NEXT and PREV buttons can be used to move from jack to jack
as required.
Example;
#01-1
#01-2
#02-1
#02-2......
Note:
The first part of a jack is for a DPT of a XDP-assigned jack. The second part is for a
single line device. Program [600] “EXtra Device Port” assigns which jacks are XDP.
Entering Characters
You can enter characters to store names for speed dial numbers, extension numbers, etc.,
by using the dialling key pad and buttons.
Each of the twelve dialling keys on the dialling key pad represents seven characters.
Refer to the “Station Speed Dialling Number / Name Assignment (KX-T7235/KX-
T7431/KX-T7433/KX-T7436 only)” in Station Programming (Section 2).
Storing your data
Press STORE to store your data.
• The STORE indicator lights red and confirmation tone sounds.
* Confirmation tone (one beep)
After pressing STORE, you will hear a beep. This informs you that your storage is
completed.
*Alarm tone (three beeps)
If you hear this alarm, your entry is not valid.
PREV
NEXT
PREV
NEXT
PREV
NEXT
