Panasonic KX-TD1232E User Manual Download Page 372

Page: 372 / 518

SLT and ISDN Telephone Features

7-5

7.2

SLT and ISDN Telephone Features

Message 2. “Gone Home”

1. Lift the handset.

2. Dial the feature number (750) and 2.

• You hear a confirmation tone and then a dial tone.

3. Hang up.

Message 3. “At Ext %%%” (extension number)

1. Lift the handset.

2. Dial the feature number (750) and 3.

3. Dial the extension number where you are.

• You hear a confirmation tone and then a dial tone.

4. Hang up.

Message 4. “Back at %% : %%” (time)

1. Lift the handset.

2. Dial the feature number (750) and 4.

3. Enter the hour (00 through 23) and the minute (00 through

59).

• You hear a confirmation tone and then a dial tone.

extension number

hour and minute

Summary of Contents for KX-TD1232E







































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TD1232E

Reviews:

Panasonic KX-TD1232E, User Manual, Page: 372 / 518

Search results

Summary of Contents for KX-TD1232E

Reviews: