Section 7
SLT and ISDN Telephone Features
Contents
7.1
Basic Operations ..................................................................7-2
Making Calls.........................................................................7-2
Receiving Calls .....................................................................7-3
7.2
SLT and ISDN Telephone Features (A - Z) .......................7-4
7.3
ISDN Telephone Features .................................................7-90
<Note>
If you use loop disconnect (LD) type single line telephone:
It is not possible to have access to the features which have “
” or “#” in
their feature numbers.
When the “Pickup Dialling (Hot Line)” feature is set on your telephone,
your dialling sequence should be done within a certain period of time
(Pickup Dial Waiting Time — default: 1 sec.) after lifting the handset.
To change the time, refer to the System Programming in the Installation
Manual.
In this manual, the default feature numbers are used to describe each
operation and illustration. Use newly programmed numbers if you have
changed the number by System Programming.
