Station Programming
2-25
2.2
Station Programming
Phantom Extension Button
(Assignment)
Allows you to assign a Flexible (CO, DSS) button as the Phantom Extension button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO, DSS) button which you wish
to assign as the Phantom Extension button.
2. Dial 88.
• The display shows:
3. Dial the phantom extension number.
• The display shows:
(— xxxx: phantom extension
number)
• To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button while in the
programming mode.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• The phantom extension number must be assigned in program [130] “Phantom
Extension Number Assignment” before assigning the Phantom Extension button.
• A DSS button can be assigned as the Phantom Extension button so that the operator
can use it for transferring a call.
• If you assigned the Phantom Extension button to one of the CO buttons (13 through 24)
on your KX-T7230 telephone and change the telephone to a KX-T7235 model, you must
re-program the setting as the KX-T7235 telephone has only 12 CO buttons. If you do
not change the setting, the phantom extension call reaches the INTERCOM button.
Programming References
• System Programming — Installation Manual
[130] Phantom Extension Number Assignment
1
2
4
AUTO DIAL
STORE
3
Phantom extension number
8
8
EXT-
CLR
EXT-xxxx
CLR
