Panasonic KX-TD1232E User Manual Download Page 435

Page: 435 / 518

7-68

SLT and ISDN Telephone Features

7.2

SLT and ISDN Telephone Features

Paging — ANSWER

Allows you to answer an announced page at any extension within the system.

Answering a page sent to the built-in speaker

1. Lift the handset.

2. Dial the feature number (43).

• You hear a confirmation tone (optional).

• You can start talking.

Answering a page sent to a particular external pager

1. Lift the handset.

2. Dial the feature number (42).

3. Dial the corresponding external pager number as follows.

1 or 2

: if you are connected to the KX-TD816

- 1 through 4 : if you are connected to the KX-TD1232

• You hear a confirmation tone (optional).

• You can start talking.

Conditions

• Only extensions within the paged group can answer “Paging — Group.”

• A confirmation tone is audible when the page is answered. Eliminating the tone is

programmable.

Programming References

• System Programming — Installation Manual

[990] System Additional Information, Field (16)

external pager number

Summary of Contents for KX-TD1232E







































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TD1232E

Reviews:

Panasonic KX-TD1232E, User Manual, Page: 435 / 518

Search results

Summary of Contents for KX-TD1232E

Reviews: