Station Programming
2-3
2.1
Station Programming Instructions
To confirm the assigned function data
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Enter the programming access number* (0 through 9, 01
through 03,
1 and #).
• Each number corresponds to the data as follows:
- 1 : Preferred Line Assignment — Outgoing
- 2 : Preferred Line Assignment — Incoming
- 3 : Full One-Touch Dialling Assignment
- 4 : Intercom Alerting Assignment
- 5 : Call Waiting Tone Type Assignment
- 6 : Self-Extension Number Confirmation
- 8 : Charge Fee Reference
- 9 : Handset/Headset Selection
- 01 : Remote Station Lock Control (— Operator only)
- 02 : CO Incoming Call Information Log Lock Clear
(— Operator only)
- 03 : Live Call Screening Password Control† (— Operator
only)
- # : Station Programming Data Default Set
-
1: Live Call Screening Mode Setting†
• The display shows the programmed data.
<Example>
When you press [5], the display shows:
(— Call Waiting tone is now programmed to Tone 1)
2. Press the HOLD (END) button.
• The display shows the initial programming mode.
— To exit from Station Programming mode: Press [PROGRAM] or lift the handset.
— If you wish to change the data, follow the programming procedure explained in this
section.
* A programming access number is required to program/confirm the function data by Station Programming.
† Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable
Panasonic Voice Processing System (one that supports digital proprietary telephone integration; e.g. KX-
TVP100).
1
2
HOLD
access number
C.W. Tone 1
