DPT Features
4-61
4.2
DPT Features
D
Display Call Information
When you have a call with an outside party, you can see the phone number or the
duration of a telephone call, the meter, the phone charge on the display by pressing the
CO button repeatedly.
When you make a call with an outside party;
• The display shows the telephone number that you are
calling.
When you receive a call from an outside party;
• The display shows the duration of a telephone call.
After receiving a signal of the telephone charge;
• The display changes to the charge.
<Example>
1. Press the CO button.
• The display shows the meter.
<Example>
2. Press the CO button again.
• The display returns to the telephone number that you are
calling or the duration of a telephone call.
Conditions
• Whenever you press the CO button, the display changes the phone number or the
duration of a telephone call, the meter, the phone charge in circular way.
• If you do not pay the telephone charge, your display does not change even if you
press the CO button.
• You can change the order of the display, the meter and the charge through System
Programming.
• Refer to the display examples in Section 9 for another display call information.
• If the displayed characters exceed sixteen digits, “&” is shown at the right-hand edge.
Programming References
• System Programming — Installation Manual
[117] Charge Display Selection
CO01 :£00000.23
CO01 :00001
1
2
CO
CO
