Panasonic KX-TD1232AL User Manual Download

Page: 215 / 328

SLT Features

5-7

5.2

SLT Features

2. Dial the feature number (750) and a desired message number (7

through 9).

3. Enter the parameters (extension number, time, month/day, etc.), if

required.

• You hear confirmation tone and then dial tone.

4. Hang up.

Cancelling

1. Lift the handset.

2. Dial the feature number (750) and 0.

• You hear confirmation tone and then dial tone.

3. Hang up.

Conditions

• Regarding Message 3;

1) If the extension number you want to dial has more than three characters, refer to System

Programming to change the setting.

2) If the extension number you want to dial has less than three characters, dial "

" or "#"

to make it up to three characters.

• A maximum of seven parameters ("%" characters) can be stored per message. You can

enter "0 through 9," "

" and "#" for the parameters.

Programming References

• System Programming — Installation Manual

[008] Absent Messages

parameters

(X: 7 through 9)

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD1232AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands

Panasonic KX-TD1232AL, User Manual

Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands