Panasonic KX-TD1232AL User Manual Download

Page: 154 / 328

3-88

DPT Features

3.2

DPT Features

Conditions

• There is a maximum of 16 extension groups. "Paging — Group" to different groups can be

performed simultaneously.

external pager number

Paging — ANSWER

Allows you to answer an announced page at any extension within the system.

Answering a page sent to the built-in speaker

1. Lift the handset or press the SP-PHONE/

MONITOR button.

2. Dial the feature number (43).

• You hear confirmation tone (optional).

• You can start talking.

Answering a page sent to a particular external pager

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (42).

3. Dial the corresponding external pager number as follows:

– 1

: if you are connected to the KX-TD816

– 1 through 4 : if you are connected to the KX-TD1232

• You hear confirmation tone (optional).

• You can start talking.

Conditions

• Only extensions within the paged group can answer "Paging — Group."

• Confirmation tone is audible when the page is answered. Eliminating the tone is

programmable.

• With the KX-T7235, you can answer the page with the display operation.

Programming References

• System Programming — Installation Manual

[990] System Additional Information, Field (16)

Feature References

System Feature Access Menu — Answering, Paging (3.4/Special Display Features)

TD816 TD1232

✔

DPT (72**)

✔

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD1232AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands

Panasonic KX-TD1232AL, User Manual

Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands