Panasonic KX-TD1232AL User Manual Download

Page: 126 / 328

3-60

DPT Features

3.2

DPT Features

Standard Operation

Setting

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Press the FWD/DND button.

• You may dial the feature number (710) instead.

3. Dial 1.

• You hear confirmation tone and then dial tone.

• The display shows:

Do Not Disturb

• The FWD/DND indicator light turns on.

4. Hang up or press the SP-PHONE/MONITOR button.

Cancelling

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Press the FWD/DND button.

• You may dial the feature number (710) instead.

3. Dial 0.

• You hear confirmation tone and then dial tone.

• The display shows:

FWD/DND Cancel

• The FWD/DND indicator light turns off.

4. Hang up or press the SP-PHONE/MONITOR button.

Conditions

• A flexible button on the KX-T7250 (no FWD/DND button provided) can be assigned as the

FWD/DND button.

• When this feature is set, "Call Forwarding" is cancelled.

• A calling extension that has "Do Not Disturb (DND) Override" enabled can override your

extension when it is set to "Do Not Disturb (DND)" mode.

• If "Do Not Disturb (DND)" mode is set, you can still answer a call by pressing the CO

button.

FWD/DND

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD1232AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands

Panasonic KX-TD1232AL, User Manual

Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands