Panasonic KX-TD1232AL User Manual Download

Page: 135 / 328

DPT Features

3-69

Handsfree Answerback

Allows you to answer an intercom call without lifting the handset.

Setting

When the SP-PHONE and the AUTO ANSWER/MUTE
indicator is off;

1. Press the AUTO ANSWER/MUTE button.

• The AUTO ANSWER/MUTE indicator light turns on.

Cancelling

When and the AUTO ANSWER/MUTE indicator is on;

1. Press the AUTO ANSWER/MUTE button.

• The AUTO ANSWER/MUTE indicator light turns off.

Conditions

• This feature overrides the "Alternate Calling — Ring/Voice" feature. Handsfree

conversation mode is established as soon as confirmation tone is delivered.

• This feature does not work for incoming CO calls or doorphone calls.

Feature References

Alternate Calling — Ring/Voice

TD816 TD1232

✔

DPT (72**)

✔

AUTO ANSWER

MUTE

AUTO ANSWER

MUTE

3.2

DPT Features

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD1232AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands

Panasonic KX-TD1232AL, User Manual

Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands