Panasonic KX-TD1232AL User Manual Download

Page: 73 / 328

3.2

DPT Features

DPT Features

3-7

4. Hang up or press the SP-PHONE/MONITOR button.

Cancelling

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (750) and 0.

• You hear confirmation tone and then dial tone.

• The display shows:

Message Cancel

3. Hang up or press the SP-PHONE/MONITOR button.

Conditions

• The selected message is displayed every time you go off-hook.

• Regarding Message 3;

1) If the extension number you want to dial has more than three characters, refer to

System Programming to change the setting.

2) If the extension number you want to dial has less than three characters, dial "

" or "#"

to make it up to three characters.

• A maximum of seven parameters ("%" characters) can be stored per message. You can

enter "0 through 9," "

" and "#" for the parameters.

• With the KX-T7235, you can execute this feature with the display operation.

Programming References

• System Programming — Installation Manual

[008] Absent Messages

Feature References

System Feature Access Menu — Absent Message Capability (3.4/Special Display Features)

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD1232AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands

Panasonic KX-TD1232AL, User Manual

Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands