Panasonic KX-TD1232AL User Manual Download

Page: 130 / 328

3-64

DPT Features

3.2

DPT Features

4. Hang up or press the SP-PHONE/MONITOR button.

To unlock the door while talking to the doorphone from any extension

1. Dial 5.

• You hear confirmation tone.

• The door is left unlocked for 5 seconds.

• The display shows:

Door 1 Open

2. Hang up or press the SP-PHONE button.

Conditions

• If you dial 5 again while the door is open, the door will stay open for another five seconds.

• If you do not answer an incoming doorphone call within thirty seconds, the call is

cancelled.

• You must program the extensions that can receive calls from each doorphone for day and

night mode.

• It is possible for any extension user to originate a call to a doorphone.

• The door can be unlocked by the following:

1) Extensions that are programmed to receive doorphone calls.

2) Any extension that is engaged on a doorphone call.

Programming References

• System Programming — Installation Manual

[607]–[608] Doorphone Ringing Assignment — Day/Night

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD1232AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands

Panasonic KX-TD1232AL, User Manual

Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands