Panasonic KX-TD1232AL User Manual Download

Page: 172 / 328

3-106

DPT Features

3.2

DPT Features

Timed Reminder

Allows you to set your extension to sound an alarm once or everyday at the
preset time.

Setting

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (76) and 1.

3. Enter the hour (01 through 12) and the minute (00 through 59).

4. Dial 0 to enter AM, or dial 1 to enter PM.

5. Dial 0 for a one time alarm setting,

or dial 1 for a daily alarm

setting.

You hear an alarm ringing at the preset time and then the setting is cleared.

You hear the alarm ringing at the preset time every day until the setting is

changed or cancelled.

6. Hang up or press the SP-PHONE/MONITOR button.

Cancelling

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (76) and 0.

• You hear confirmation tone and then dial tone.

• The display shows:

Alarm Cancelled

3. Hang up or press the SP-PHONE/MONITOR button.

hour and minute

TD816 TD1232

✔

DPT (72**)

✔

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD1232AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands

Panasonic KX-TD1232AL, User Manual

Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands