Panasonic KX-TD1232AL User Manual Download

Page: 188 / 328

3-122

DPT Features

3.3

Operator Service Features

Check-Out

1. Press the Hotel (F10) button.

2. Press the Check-Out (F2) button.

• DSS indicator in check-in mode turns red.

3. Dial the extension number or press the DSS button that you want

to check-out.

4. Press the END (S1) button.

• The display shows the charge.

If you want to charge the minibar or other expenses, or change the
expenses;

5. Press the appropriate button {(F2) through (F4)} and enter the

revised charge.

• If you have nothing to revise, skip this step.

• Pressing each button corresponds to the following operations:

— PRINT (S3) button : To print out the charge.

— PREV (S2) button : To return to step 3.

6. Press the END (S1) button.

7. Press the YES (S1) button or NO (S3) button.

— YES : The check-in extension's charge counter is cleared.

The display returns to the initial display.

— NO : The display returns to step 2.

F10

Check Out Room :2345

Telephone 00100.40

Minibar 00000.00

Others 00000.00

END

Hotel

F10

extension number

END

check in

check out

Others charge

END

Others

Check Out Room:2345

Really check-Out ?

YES

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD1232AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands

Panasonic KX-TD1232AL, User Manual

Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands