2.2
Programming
2-28
Station Programming
Preferred Line Assignment — Outgoing
Allows you to select the desired outgoing line preference to originate calls from the following
four line preferences:
1.) No Line Preference
2.) Idle Line Preference
3.) Prime Line (CO line) Preference
4.) Prime Line (INTERCOM) Preference (— default)
Follow the programming procedure for your selection.
<Note>
When setting "Idle Line Preference," "No Line Preference" or "Prime Line (CO Line)
Preference," it is not possible to have access to any DPT features after going off-hook. To
access these DPT features, press the INTERCOM button before or after going off-hook.
No Line Preference — Outgoing
(Assignment)
When you go off-hook, you are not connected to any line. You must make a choice.
— Be sure that you are in the Station Programming mode : Press [PROGRAM] [9] [9].
1. Dial 1.
• The display shows the current status.
2. Dial 1.
• The display shows:
Pref.Out:No
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit from Station Programming mode : Press [PROGRAM] or lift the handset.
Idle Line Preference — Outgoing
(Assignment)
When you go off-hook, you are connected to an idle line.
— Be sure that you are in the Station Programming mode : Press [PROGRAM] [9] [9].
1. Dial 1.
• The display shows the current status.
2. Dial 2.
• The display shows:
Pref.Out:Idle
1
1
2
1
3
AUTO DIAL
STORE
1
1
2
2
With
Compliments
Absolute
Phone
&
Data
