Panasonic KX-TD1232AL User Manual Download

Page: 102 / 328

3-36

DPT Features

3.2

DPT Features

Conditions

• Up to ten calls can be parked.

• If a parked call is not retrieved within the specific period of time (default: 12 rings),

"Transfer Recall" occurs.

• If a parked call is not retrieved within thirty minutes, it is automatically disconnected.

• Confirmation tone is audible when the parked call is retrieved. Eliminating the tone is

programmable.

Programming References

• System Programming — Installation Manual

[201] Transfer Recall Time

[990] System Additional Information, Field (16)

Feature References

System Feature Access Menu — Call Park (3.4/Special Display Features)

Call Pickup, CO Line

Allows you to answer an incoming CO call that is ringing at another
extension.

1. Lift the handset or press the SP-PHONE/

MONITOR button.

2. Dial the feature number (4

• You hear confirmation tone (optional).

• You can talk to the caller.

Conditions

• It is not possible to answer Call Waiting calls.

• Confirmation tone is audible when the call is picked up. Eliminating the tone is

programmable.

Programming References

• System Programming — Installation Manual

[990] System Additional Information, Feild (16)

Feature References

Call Pickup Deny
Call Waiting

TD816 TD1232

✔

DPT (72**)

✔

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD1232AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands

Panasonic KX-TD1232AL, User Manual

Search results

Summary of Contents for KX-TD1232AL

Reviews:

Related manuals for KX-TD1232AL

Brands by name

Popular brands