75
Useful Information
Chapter 5
Problem
The handset does not ring.
The base unit does not ring.
You cannot program function items such
as selecting language.
You cannot store a name and phone
number in the phonebook.
While programming or searching, the
unit starts to ring and stops the
program/search.
The unit does not display the caller’s
phone numbers.
The display goes to the standby mode
while viewing the Caller List or
phonebook.
does not function.
You cannot redial.
Remedy
•
Turn the power ON (p. 13).
•
The ringer is set to OFF. Select the desired volume
level (p. 20).
•
The ringer is set to OFF. Set to HIGH, MEDIUM or
LOW (p. 20).
•
Programming is not possible while the unit is in the
talk, intercom or speakerphone mode.
•
Do not pause for over 60 seconds while
programming.
•
You cannot store a name and phone number while
the unit is in the talk, speakerphone or intercom
mode.
•
Do not pause for over 60 seconds while storing.
•
To answer the call, press
/
. Start from
the beginning after hanging up.
•
Other telephone equipment may be interfering with
your phone. Disconnect them and try again.
•
Other electrical appliances connected to the same
outlet may be interfering with the Caller ID
information. Telephone line noise may be affecting
the Caller ID information.
•
Do not pause for over 60 seconds while searching.
•
The handset is too far from the base unit.
•
The handset is engaged in an outside call or is
viewing the Caller List or phonebook. Wait until the in
use indicator (
) light goes out.
•
If the last number dialled was more than 24 digits
long, the number will not be redialled.
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Page 75
