Special Features
44
Setting the Key Lock
You can lock the handset dialling buttons. Only incoming calls are accepted until the key lock is
cancelled.
When the unit is in the standby mode, press and hold
until a beep sounds.
•
“
[X]
” is displayed and all dialling buttons are locked.
To cancel the key lock
When the unit is in the standby mode, press and hold
for about 2 seconds.
•
“
[X]
”will disapper and the key lock will be cancelled.
•
“The key lock will also be cancellled when the power is turned OFF (p. 13).
B a s e 1 [ X ]
1 2 . 0 4 1 5 : 0 0
Using the Recall Feature
is used to access special telephone services (optional) such as call waiting. Contact your
telephone company for details.
Example: British Telecom call waiting
When a call waiting tone is heard during a conversation:
a)
To hold the existing call and accept the waiting call
Press
•
Each time you press ress
, you can switch between the first and second call.
•
Depending on the provider, you may need to enter a code after pressing
. Follow the
instructions given by your provider.
b)
To accept the waiting call and hang up the existing call
Press
. When the unit rings, press
to answer the new call.
c)
To reject the waiting call
Wait for the call waiting to time out. This will take about 40 seconds.
If your unit is connected to a PBX, pressing
allows you to access some features of your host PBX
such as transferring an extension call.
R
R
R
R
R
KX-TCD715EM-5Basic3 01.7.19 2:13 PM Page 44
