Panasonic KX-TCD715EM Operating Instructions Manual Download Page 11

Page: 11 / 80

Chapter 1

Settings

Preparation

Fasten the AC adaptor cord to
prevent it from being
disconnected.

Hook

LINE

Telephone Line Cord

AC Adaptor

To Mains Outlet (AC 220— 240 V, 50 Hz)

To B.T. Socket

TNV

Connections

•

USE ONLY WITH Panasonic AC ADAPTOR PQLV1E.

•

The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during
use.)

•

If your unit is connected to a PBX which does not support Caller ID services, you cannot access
those services.

•

To connect a standard telephone on the same line, see page 77.

The abbreviation TNV means “Telephone Network Voltage”.

CONNECTION OF POWER SUPPLY

This apparatus is intended for use when powered by the PQLV1E.
Using other power supplies will invalidate any approval given to this apparatus.

KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM Page 11

Summary of Contents for KX-TCD715EM

















































































Search results

Summary of Contents for KX-TCD715EM

Reviews:

Related manuals for KX-TCD715EM

Brands by name

Popular brands

Panasonic KX-TCD715EM, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD715EM

Reviews:

Related manuals for KX-TCD715EM

Brands by name

Popular brands