Panasonic KX-TCD715EM Operating Instructions Manual Download Page 37

Page: 37 / 80

Basic Operations

Chapter 2

Finding Items in the Phonebook

Make sure that the power is ON (p. 13) and the unit is in the standby mode.

Press

to enter the phonebook.

•

The first item is displayed.

Press

until the desired name

is displayed.

•

You can also search for the item by initial.

•

To exit the phonebook, press

Press

to enter the phonebook.

•

The first item is displayed.

Press

until the desired name

is displayed.

•

All phonebook items are sorted in the
following order.

To search for a name by initial

Press

to enter the phonebook.

•

The first item is displayed.

Press the dialling button for the first
letter of the desired name until any name
with the same initial is displayed.

•

The letters are printed on the dialling
buttons.

Ex. To find “Felix”, press

repeatedly

until the first item under “F” is displayed.

Press

until the desired name is

displayed.

•

If “

No Stored Memory

” is displayed in

step 1, the phonebook is empty. The handset
will return to the standby mode.

Alphabet Letter

Symbol

Telephone number

(When a name is not stored)

Number

Press .

Dialling from the Phonebook

Make sure that the power is ON (p. 13) and the unit is in the standby mode.

Press or .

•

The number is dialled automatically.

To hang up, press

or place the

handset on the base unit.

A N N E
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
7 8 9 0 1 2

KX-TCD715EM-4Basic2 01.7.19 2:13 PM Page 37

Summary of Contents for KX-TCD715EM

















































































Search results

Summary of Contents for KX-TCD715EM

Reviews:

Related manuals for KX-TCD715EM

Brands by name

Popular brands

Panasonic KX-TCD715EM, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD715EM

Reviews:

Related manuals for KX-TCD715EM

Brands by name

Popular brands