Panasonic KX-TCD715EM Operating Instructions Manual Download Page 41

Page: 41 / 80

Intercom

Basic Operations

Chapter 2

A 2-way intercom is available between the handset and the base unit.

Paging the handset from the
base unit (Handset locator)

Using this feature, you can locate the handset if
misplaced.

Base unit:
Press .

•

The handset rings for 1 minute and “

”

flashes.

•

To stop paging, press

again.

Handset:
Press to

answer.

Base unit:
Talk into the MIC.

Handset or Base unit:
To end the intercom, press

on the

handset,
OR

on the base unit.

Paging the base unit from the
handset

Handset:
Press ,

then

•

“

” is displayed and the base unit rings.

•

To stop paging, press

again.

Base unit:
Press or to

answer.

Base unit:
Talk into the MIC.

Handset or Base unit:
To end the intercom, press

on the

handset,
OR

on the base unit.

I N T

During the intercom:

•

If two tones sound, an incoming call has been received. To answer, press

. The intercom is ended.

KX-TCD715EM-5Basic3 01.7.19 2:13 PM Page 41

Summary of Contents for KX-TCD715EM

















































































Search results

Summary of Contents for KX-TCD715EM

Reviews:

Related manuals for KX-TCD715EM

Brands by name

Popular brands

Panasonic KX-TCD715EM, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD715EM

Reviews:

Related manuals for KX-TCD715EM

Brands by name

Popular brands