manualshive.com logo in svg

Panasonic KX-TCD715EM, Operating Instructions Manual, Page: 53 / 80

Share
Download
Panasonic KX-TCD715EM Operating Instructions Manual Download Page 53

53

Advanced Operations

Chapter 3

Setting the Call Waiting Tone

If an incoming call has been received during an intercom between handsets, a call waiting tone
sounds. You can choose whether or not the tone sounds. The factory preset is ON.

Press 

or 

to select “

Setting Handset

” then 

or 

to select

“

Tone Option

” then 

or 

to select “

Call Waiting

” then 

or 

to select ON or OFF 

Setting the Battery Low Alarm

You can choose whether or not the handset will sound a battery low alarm. The factory preset is ON.

Press 

or 

to select “

Setting Handset

” then 

or 

to select

“

Tone Option

” then 

or 

to select “

Battery Alarm

” then 

or 

to select ON or OFF 

Setting the Range Warning Alarm

You can choose whether or not the handset will sound a range warning alarm. The factory preset is
OFF.

Press 

or 

to select “

Setting Handset

” then 

or 

to select

“

Tone Option

” then 

or 

to select “

Range Alarm

” then 

or 

to select ON or OFF 

KX-TCD715EM-7Advance2  01.7.19 2:14 PM  Page 53

Summary of Contents for KX-TCD715EM

















































































Reviews:

No comments