2.6 Help
PC Programming Manual
57
Setting Features
A
•
The following setting data is not saved to the SD memory card, so will be deleted when
the PBX is initialized. This data is stored in the PBX's battery backup memory.
•
Incoming Call Log
•
Outgoing Call Log (including Last Number Redial)
•
Message Waiting
•
SMDR
•
PBX date and time
•
Timed Reminder
•
Daily test start time
•
PT handset/headset volume
•
PT SP-PHONE volume
•
PT ring volume
•
PT display contrast
•
ICD Group login status
(All extensions are set to Login by default.)
•
ICD Group Ready/Not Ready status
(All extensions are set to Ready by default.)
•
Live Call Screening (LCS) On/Off
•
Hands-free Answerback status
•
Absent Message status of extensions
(Absent Message data itself is not cleared.)
•
FWD/DND status
(FWD destinations are not cleared.)
•
Extension Dial Lock/Remote Extension Dial Lock
•
Extension PIN Lock/Extension PIN Lock counter
•
Verification Code PIN Lock/Verification Code PIN Lock counter
•
Password Lock counter for Remote System Programming
•
PBX Error Log
In addition, the following data cannot be restored:
•
SVM Log and messages (both greeting messages and voice messages left by
callers) recorded in an SVM card
Q
How do I change the dialing mode of an analog CO line?
A
•
From the
2.7.8 [1-1] Slot—LCO Port
screen, change the
Dialing Mode
setting of the
target port to "DTMF" or "Pulse", as required.
Q
How do I set disconnect detection (CPC Detection) for an analog CO line?
A
•
From the
2.7.8 [1-1] Slot—LCO Port
screen, modify the
CPC Signal Detection Time—
Outgoing, Incoming
setting of the target port.
The required value varies by carrier. Transmission and reception can be set separately.
Q
How do I change the type of an extension port?
A
•
Set the port to OUS status. Then, change
DPT Type—Type (for Hybrid port)
in the
2.7.4 [1-1] Slot—Extension Port
window.