2.14 [8] ARS
420
PC Programming Manual
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
1.17.2 Tenant Service
2.14.7 [8-6] Leading Number Exception
Specifies telephone numbers that will not be connected using the ARS feature. When the user-dialed
number includes a leading number exception, the PBX sends the number to a CO line by the Idle Line
Access method if
ARS Mode
in
2.14.1 [8-1] System Settings
is "on".
A maximum of 200 different leading number exceptions can be programmed. 40 leading number
exception entries are displayed on the screen at a time. To display other sets, click the applicable tab.
Leading Number Exception
Specifies the leading number exception.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, #, and X)
Maintenance Console Location
2.14.7 [8-6] Leading Number Exception
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
2.14.8 [8-7] Authorization Code for TRG
An Authorization code can be specified for each trunk group. The Authorization codes entered here
can be added to user-dialed numbers by adding "G" to the
Modify Command
specified on the
Carrier
tab of screen 2.14.6 [8-5] Carrier.
8 trunk groups are displayed on the screen at a time. To display other groups, click the applicable tab.
Authorization Code for Trunk Group—TRG 01–TRG 64
Specifies the Authorization code of each carrier for each trunk group.
Default
Not stored.
