2.1 Introduction
18
PC Programming Manual
2.1
Introduction
2.1.1
Starting Maintenance Console and Software Modes
Every time Maintenance Console is started, a dialog box will appear. From here, you can enter any
of the 3 available software modes.
•
Initial mode
Initial mode describes the state when Maintenance Console is not connected to the PBX,
and no data files are open. In Initial mode, most options of Maintenance Console are
unavailable. For details, see
2.1.2 Access Levels
.
•
Batch mode
Batch mode allows you to create new system data files, and make modifications to system
data files stored on your PC, without being connected to the PBX. When you connect to the
PBX, the modified data will be uploaded at one time.
•
Interactive mode
Interactive mode allows you to directly modify the system data and settings stored in the
PBX's memory from a PC that is connected to the PBX. This mode displays the system data
that is currently being used by the PBX, rather than the system data stored on the SD
memory card. Data can be modified and results displayed in real time.
To start Maintenance Console in Initial mode
1.
Enter the relevant programmer code.
2.
Click
OK
.
Maintenance Console will start.
To start Maintenance Console in Batch mode
1.
Enter the relevant programmer code.
2.
Click
OK
.
Maintenance Console will start.
3.
Select an option from the
File
menu.
•
Select
New
to create a new system data file.
•
Select
Open
to open an existing system data file.
To start Maintenance Console in Interactive mode
1.
Enter the relevant programmer code.
2.
Select the
Connect to PBX
check box.
Connection options will be displayed.
•
Select the
Use profile
check box if you want to use a pre-saved profile. This option is only
available when one or more profiles have been previously stored.
a.
Select the profile to use from the drop-down list.
The
Setup
button will become unavailable.
b.
If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be
entered.
•
Select the method of connecting to the PBX if you do not want to use a stored profile.
