2.2 File
PC Programming Manual
29
2.2
File
2.2.1
File—New
Creates a new system data file, used to program the PBX in Batch mode. All settings are in their initial
or default state.
This option is only available at Installer level.
To upload the file created here to the SD memory card installed in the PBX, see
2.5.2 Utility—File
Transfer PC to PBX (SD Card)
.
Note
Since selecting this option creates a blank system data file, uploading this file to the PBX will
overwrite all previous settings. Use only when necessary.
To create a new system data file
1.
From the
File
menu, select
New
.
2.
Click
OK
.
2.2.2
File—Open
Opens a system data file previously saved on the PC, and enters Batch mode.
When opening a file created with an older version of the Maintenance Console, you will be asked
whether you want to convert the data for use with the current version or not. Using the data without
converting may result in some data being loaded to an incorrect destination, and is not
recommended.
For more details regarding file conversion, see
2.4.7 Tool—System Data Convert
.
If the file is not supported by the PBX (e.g. a system data file from an incompatible PBX), it will not
be opened. The only files that can be opened are files that were created by the Maintenance Console
for a supported PBX.
To upload a file opened here to the SD memory card installed in the PBX, see
2.5.2 Utility—File
Transfer PC to PBX (SD Card)
.
To open a system data file
1.
From the
File
menu, select
Open
.
The Open dialog box will be displayed.
2.
Navigate to the folder containing the system data file you want to open.
3.
Select the file.
4.
Click
Open
.
If the file was created with an older version of the Maintenance Console, you will be asked if you
want to convert the data.
•
Click
Yes
to convert the data for use with the current version of the Maintenance Console.
Enter a name for the new converted system file.
•
Click
No
to open the file as it is.
