Panasonic KX-NS700, Operating Manual

Page: 319 / 362

Button Steps
Log-in/Log-out of a
specified group
Select Log-in/Log-out from Type .
Then select Incoming Group from Parameter Selection .
And, enter the Incoming call distribution group extension number in
Extension Number .
Log-in/Log-out for all
groups Select Log-in/Log-out from Type .
Then select All from Parameter Selection .
Hurry-up
Select Hurry-up from Type .
Then enter the incoming call distribution group extension number in
Extension Number .
Wrap-up Select Wrap-up from Type .
System Alarm Select System Alarm from Type .
Time Service (Day/Night/
Lunch/Break)
Select Time Service from Type .
Then in Parameter Selection , select which time modes will be switched
manually.
In
Optional Parameter (Ringing Tone Type Number) , select the Time
Table (tenant number) to be used for changing time modes in Automatic
Switching mode.
Answer Select Answer from Type .
Release Select Release from Type .
Toll Restriction (TRS)
Select TRS Level Change from Type .
Then select the Toll Restriction (TRS) Level (1–7) from Parameter
Selection .
Calling Line Identification
Restriction (CLIR)
Select CLIR from Type .
Connected Line
Identification Restriction
(COLR)
Select COLR from Type .
Headset Select Headset from Type .
Time Service Switching
Mode (Automatic/Manual)
Select Time Service - Automatic/Manual from Type .
Then in Parameter Selection , select the Time Table (tenant number) to be
used when Time Service Switching Mode is set to Automatic .
Network Direct Station
Selection (NDSS)
Select NDSS from Type .
Then enter the another PBX extension number in Dial (max. 16 digits
consisting of 0–9).
Note
The button may not be available depending on the networking method in
use or the settings of the PBX.
CTI Select CTI from Type .
Primary Directory Number
(PDN)
Select PDN from Type .
Document Version 2014-11 Operating Manual 319
3.2.1 User Programming