Panasonic KX-NS700 Operating Manual Download Page 105

Page: 105 / 362

To set/cancel

PT/KX-UT113/KX-UT123/KX-UT133/KX-UT136/KX-UT248

Press

AUTO ANS

While on-hook

•

PT users: The AUTO ANS button light shows the current status as follows:

Off:

Not set

Red on:

Set

•

KX-UT series SIP phone (except KX-UT670) users: When Hands-free Answerback is set,
the AUTO ANS icon appears on the display.

•

PS and KX-UT670 users: Refer to the documentation for your phone.

1.3.32 Hands-free Operation

You can have a conversation in hands-free mode using the SP-PHONE button.

To make/answer a call

Press

SP-PHONE

PT/KX-UT series

•

When performing hands-free operation:

–

If it is difficult to hear the other party’s voice,

Increase the volume using the Navigator Key, Jog Dial, or Volume Key.

–

If the other party has difficulty hearing you,

Decrease the volume.

–

If the other party reports that your voice echoes,

Use the telephone in a room that has curtains, carpeting or both.

–

If parts of the conversation cannot be heard,

If you and the other party speak at the same time, parts of your conversation may be lost.
To avoid this, try to speak alternately.

•

KX-UT133/KX-UT136/KX-UT248 users can have a conversation in hands-free mode by
pressing the flashing CO or DN button.

Document Version 2014-11

Operating Manual

105

1.3.32 Hands-free Operation

Summary of Contents for KX-NS700











































































































































































































































































































































































Search results

Summary of Contents for KX-NS700

Reviews:

Related manuals for KX-NS700

Brands by name

Popular brands

Panasonic KX-NS700, Operating Manual

Search results

Summary of Contents for KX-NS700

Reviews:

Related manuals for KX-NS700

Brands by name

Popular brands