Panasonic KX-NS700, Operating Manual

Page: 317 / 362

5. Click OK .
Customizing the Flexible Buttons
You can customize the flexible buttons on PTs, Add-on Key Modules, PSs, and KX-UT133/KX-UT136/
KX-UT248/KX-UT670 SIP phones. They can then be used to make or receive outside calls or as feature
buttons.
1. In the Telephony Feature tab, click Flexible Button
View/Edit .
2. To set the flexible buttons, specify each button on the
Flexible Button screen.
Follow the table below to set each parameter. When you
finish, click
OK .
Button Steps
Loop-CO (L-CO)
Select Loop CO from Type .
To specify the ring tone, select the ring tone type from Optional Parameter
(Ringing Tone Type Number) .
Group-CO (G-CO)
Select Group CO from Type .
Then specify the CO line group number in Parameter Selection .
To specify the ring tone, select the ring tone type from Optional Parameter
(Ringing Tone Type Number) .
Single-CO (S-CO)
Select Single CO from Type .
Then specify the CO line number in Parameter Selection .
To specify the ring tone, select the ring tone type from Optional Parameter
(Ringing Tone Type Number) .
Direct Station Selection
(DSS) Select DSS from Type .
Then enter the extension number in Extension Number .
One-touch Dialing
Select One-touch from Type .
Then enter the desired number in Dial (max. 32 digits consisting of 0–9, ,
#, T [Transfer], [ ] [Secret], P [Pause], and F [Flash]).
Note
•
If you store an outside party’s number, you should first store a line
access number.
If you need to enter an account code, you can enter the specified
account code before the line access number.
<Example>
Account
code
1234
Account code
delimiter
#
Automatic line
access number
9
Phone number
SECRET
[ 123 4567 ]
Account code
feature no.
49
•
For KX-UT series SIP phone users:
Use only 0–9, , and # for One-touch Dialing buttons. If characters
other than these are stored, they will be considered invalid. Only the
digits up to an invalid character will be sent when using that
One-touch Dialing button.
Document Version 2014-11 Operating Manual 317
3.2.1 User Programming