•
Only KX-TVM series VPSs connected using DPT integration support this feature.
•
Mailboxes for extensions connected to other PBXs in the network must be set up manually.
•
An extension can receive Message Waiting notifications from multiple VPSs connected to PBXs in the
network. When multiple notifications of the number of unheard messages in an extension user’s message
box are sent from different VPSs, the most recent notification will be displayed.
•
A flexible button cannot be customised as a Message Waiting button for another extension at a different
PBX.
•
Whether or not Enhanced QSIG information is transmitted can be set in the TIE table.
•
When PBXs are connected by PRI23 cards, the card must be set to ISDN Standard mode. If set to T1
mode, the card must be removed and reinstalled to allow the mode to be changed. When the card is
reinserted into the PBX, it is possible to choose whether the card will be set to T1 mode or ISDN Standard
mode. The default is ISDN Standard.
•
PBX Code Method
The number used in this method must be no more than 8 digits.
•
When using a mailbox number containing more than 5 digits, the version of the KX-TVM series VPS must
be 2.1 (Main Software Version 2.50) or later.
•
Transfer to Mailbox
It is possible to transfer calls to a mailbox of a VPS at another PBX, by creating a flexible button containing
the following:
[T] + extension number of VPS at other PBX + [P] + [#] + 6
Then, the extension user can transfer calls to a mailbox by pressing this key, entering the mailbox number,
and going on hook.
•
The VM Menu feature cannot be used in a Centralised Voice Mail network. When extensions belonging to
a PBX that is not connected to the VPS have a mailbox in the VPS, the VM Menu feature should be disabled
for the mailbox using the Class of Service (COS) setting of the VPS. Otherwise, there may be an answering
delay of about 6 seconds.
PC Programming Manual References
New Card Installation—ISDN Standard Mode for PRI23 Card
11.1 [9-1] TIE Table—Centralised VM
11.2 [9-2] Network Data Transmission
13.1 [11-1] Main—Maintenance
→
Error Log for Centralised VM—Network MSW Transmission (Counter)
→
Error Log for Centralised VM—Network MSW Transmission (Buffer)
Feature Guide References
1.24.3 Voice Mail DPT (Digital) Integration
1.30.1 TIE Line Service
376
Feature Guide
1.30.5 QSIG Enhanced Features
Summary of Contents for KX-NCP500
